Manual Hydraulic Jig

The jig consists of a bucket like container with a 3mm screen fixed at the top. It has a manual handle used to jig the bucket. For physical separation, the bucket is filled with ore material, and then immersed in a drum of water and jigged manually. The shaking movements in the water currents push the light material out of the bucket. The oversize and heavy material will remain in the bucket and removed by hand .

Manual Hydraulic Jig - Technology Assessment

Click any of the 'Assessment' data points in the table to learn more about the data or to contribute.

Categories	Sub-categories	Assessment questions	Assessment
Properties of the ore	Type of deposits	Is the technology suitable for hard rock deposits?	None
		Is the technology suitable for alluvial gold deposits?	Yes
		Is the technology suitable for eluvial gold deposits?	None
	Type of ore	Is the technology suitable for free milling ores?	None
		Is the technology suitable for oxide ores?	None
		Is the technology suitable for sulphide ores?	None
		Is the technology suitable for carbonaceous ores?	None
		Is the technology suitable for refractory ores?	None
		Is the technology suitable for sand rock bearing ore?	None
		Is the technology suitable for ore with clay material?	None
		Is the technology suitable for ore bearing nuggets?	Yes
		Is the technology suitable for ore in desert areas?	None
		Is the technology suitable for ore in wet conditions?	None
		Is the technology suitable for ore in coarse gravels?	None
		Is the technology suitable for ore in fine gravels?	None
	Grade/gold content	Is the technology suitable for high grade ores?	None
		Is the technology suitable for low grade ores?	None
	Grain size of the gold)	Is the technology suitable for fine grained gold?	No
		Is the technology suitable for course grained gold?	No
		Is the technology suitable for mixed fine and course material?	No
		Is the technology suitable for very/ultra fine grained gold?	No
	Feed volume (batch volume)	Is the technology suitable for large quantity of feed material?	No
		Is the technology suitable for small quantity of feed material?	Yes
Operationals requirements	Cost of equipment	Are the costs of procuring the technology affordable to artisanal miners?	None
		Are the costs of procuring the technology affordable to small-scale miners?	None
		Are the costs of operating the technology affordable to artisanal miners?	None
		Are the costs of operating the technology affordable to small-scale miners?	None
		Are the costs of maintanance and replacement affordable to small-scale miners?	None
		Are the costs of maintanance and replacement affordable to artisanal miners?	None
	Utilities and inputs required	Does the technology require water?	Yes
		Is the amount of water required suitable to processing by individual miners?	None
		Does the technology require electricity or power source?	No
		Is the amount of electricity required suitable to processing by individual miners?	None
		Does the technology requre diesel?	No
		Is the amount of diesel required suitable to processing by individual miners?	None
		Does the technology require reagents during processing?	No
		Is the amount of reagents suitable for processing by individual miners?	None
		Does the technology require any other infrastructure?	No
	Type of organisation	Does the technology allow operation by individual miners?	Yes
		Does the technology allow operation by group of miners?	No
		Does the technology allow operation by organisations?	No
		Does the technology allow operation by processing plants?	No
		Does the technology work only with a continous system?	No
		Does the technology work with batch and continous systems?	No
		Does the technology work only with a batch system?	Yes
Processing flowsheet and performance of the techology	Processing flow	Does the technology work as a standalone?	Yes
		Does the technology work as part of a process system?	No
	Gold recovery	Does the technology offer high recovery rates compared to the amalgamation process?	None
		What are the typical gold recoveries for this technology?	None
		Does the technology produce gold directly?	Yes
		Does the technology produce gold directly but in a different form to be converted to gold?	No
		Does the technology require other processes to recover the gold?	No
		Are there potential gold losses during processing with this technology?	None
	Processing time	Does the technology offer less processing time compared to the amalgation process?	None
	Tailings	Can the technology re-process tailings?	None
	Recovery of other minerals	Can the technology recover other minerals in addition to gold?	Yes
	Visual tracking and monitoring	Does the technology allow visual tracking and/or monitoring?	None
Local considerations	Availability of the equipment	Does the technology make use of equipment that is locally available?	Yes
	Availability of the inputs	Does the technology require inputs that can be locally sourced?	Yes
	Scalability of the technology	Can the technology be scaled up or down to suit the spectrum of ASGM activities?	No
	Adaptability of the technology	Can the technology be used in remote areas?	Yes
	Ease of use/learning (skills requirement)	Is the technology easy to use or learn?	Yes
		Does the technology require knowledge /skills on metallurgy to use?	No
	Capacity to maintain	Is the technology easy to maintain?	Yes
Health, safety and environment Risks	Health and safety hazards	Does the recovery of gold using this technology pose any health and safety hazards?	No
	Environmental risks	Does the recovery of gold using this technology pose any environmental risks?	No